Charging Station for Gas Boiler - Top Solutions for Stable Heating
February 19, 2026
A gas boiler does not consume a lot of electricity, but without power it simply stops. The pump, automation, control board - all of this depends on stable 220 V. And when the lights go out for several hours, it becomes clear how important a backup power source is.
In this case, a charging station works as a compact energy reserve. No noise, no fuel, no complicated connection. The main thing is to choose a model with the right power and sufficient capacity so that the boiler can operate calmly for the required time and does not go into emergency mode.
1. BLUETTI Elite 100 V2
BLUETTI Elite 100 V2 is used as a backup power supply for a gas boiler in an apartment or private house. The LiFePO4 battery and pure sine wave output ensure stable operation of the circulation pump and electronic control board. When the grid is disconnected, the UPS mode switches the power quickly, without restarting the boiler and without failures in the automation.
The body is compact, with a convenient handle for carrying. The panel has 230 V sockets and additional ports for accompanying equipment. The screen displays the charge level and current load, so it is easy to monitor the autonomous operation time. The format is suitable for situations where it is important to maintain heating without connecting extra devices.
Key features:
Pure sine wave for correct operation of the gas boiler
UPS mode with fast switching
Support for charging from the grid and solar panels
Display showing load and charge level
Compact body with handle
Specifications:
Battery capacity: 1024 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket
2. BLUETTI Elite 320
BLUETTI Elite 320 is used as a stationary backup for a gas boiler in a house where outages can last many hours. The 3200 Wh capacity allows maintaining the heating system for a long time. The continuous power of 1800 W is designed for stable load, and the peak power covers short-term inrush currents.
The station is designed for stationary placement due to its 34 kg weight, but it is equipped with wheels and an extendable handle for movement. Charging from the grid and solar panels is supported via an MPPT controller. The display shows operating parameters in real time. This format is chosen for long-term autonomy without using a generator.
Key features:
Large capacity for long autonomous operation
Pure sine wave for stable boiler power supply
UPS mode with fast switching
Charging from the grid and solar panel
Wheels and handle for transportation
Specifications:
Battery capacity: 3200 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket, XT60
3. EcoFlow DELTA 3 EU-Version
EcoFlow DELTA 3 EU-Version is used as a backup power source for a gas boiler in an apartment or medium-sized house. With a capacity of 1024 Wh and continuous power of 1800 W, it easily supports the operation of the boiler automation and circulation pump without overloads.
It is placed next to the heating equipment and kept connected to a socket or solar panel. The LiFePO4 battery is designed for approximately 4000 cycles, which is suitable for regular backup use. The display shows the current load and remaining charge, so it is easy to estimate how long the boiler can run autonomously.
Key features:
Pure sine wave for stable boiler operation
UPS function with automatic switching
Charging from the grid, car, and solar panels
LiFePO4 battery with increased cycle life
Ability to connect an additional battery
Specifications:
Battery capacity: 1024 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 4 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket, XT60
4. Anker Solix F1500 1536Wh 1800W
Anker Solix F1500 is used as a backup for a gas boiler in a house or apartment where it is important to maintain heating during a power outage. The pure sine wave output maintains stable voltage for the pump and control board. The UPS mode allows automatic switching to battery power without restarting the boiler.
The body is medium-sized, with a carrying handle. The panel has 230 V sockets and additional ports for accompanying equipment - a router, lighting, or circulation pump. The display shows the charge level and current load. This option is suitable for those who want to solve the heating issue without an excessive power reserve.
Key features:
Pure sine wave for correct gas boiler operation
UPS mode during power outage
Support for charging from socket, car, and solar panel
Presence of a display for load monitoring
Built-in carrying handle
Specifications:
Battery capacity: 1536 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, car socket, XT60
5. EcoFlow Delta 3 1000 Air
EcoFlow Delta 3 1000 Air is used to support a gas boiler in an apartment or small house. The compact body simplifies placement next to heating equipment. The pure sine wave output ensures stable electronics operation, and the built-in UPS mode switches power without a noticeable pause.
The weight is relatively small, carrying does not cause difficulties. The controls are simple, the display shows the charge level. The format is suitable for a basic backup scenario when it is necessary to maintain heat without connecting extra equipment.
Key features:
Pure sine wave for the boiler control board
UPS mode with automatic switching
Compact body with handle
Ability to charge from the grid and solar panel
Display for status monitoring
Specifications:
Battery capacity: 960 Wh
Continuous power: 500 W
Battery type: LiFePO4
Device connection: 1 AC 230V socket, USB Type-A, USB Type-C
6. BLUETTI AC180
BLUETTI AC180 is used as a backup power supply for a gas boiler in a private house or cottage. The LiFePO4 battery and pure sine wave output support stable operation of the pump and automation. When the grid is disconnected, the UPS function provides fast switching to battery power.
The body is compact for its class, with a carrying handle. The panel includes 230 V sockets and a set of ports for additional equipment. The display shows the main operating parameters, simplifying control of autonomous mode. Suitable for a scenario requiring a moderate energy reserve without complicated installation.
Key features:
Pure sine wave for heating equipment
UPS mode for protection against outages
Support for charging from the grid, car, and solar panel
Display showing load
Ability to connect an additional battery
Specifications:
Battery capacity: 1152 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, car socket, wireless charging
7. EcoFlow DELTA 2
EcoFlow DELTA 2 is used for backup power of a gas boiler in an apartment or medium-sized house. The 1024 Wh capacity is sufficient to maintain automation and pump operation during a power outage. The continuous power of 1800 W provides a reserve for accompanying equipment.
The station supports capacity expansion with an additional battery if longer runtime is required. Charging is possible from the grid, car cigarette lighter, or solar panels. The display shows input and output power as well as remaining charge. This option is suitable for regular backup use without excessive power.
Key features:
Pure sine wave for heating equipment
UPS mode during power outage
Ability to connect an additional battery
Support for charging from the grid and solar panel
Information display
Specifications:
Battery capacity: 1024 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 4 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket
8. BLUETTI Premium 100 V2
BLUETTI Premium 100 V2 is used for backup power of a gas boiler in an apartment or private house. The LiFePO4 battery is designed for a long service life, and the pure sine wave supports stable operation of the control board and pump. In UPS mode, switching occurs quickly, reducing the risk of heating shutdown.
The format is compact, with a carrying handle. The panel has 230 V sockets and a set of ports for additional equipment. The display shows the charge level and current load. Suitable for a scenario where it is necessary to power the boiler and several low-power devices without complicated installation.
Key features:
Pure sine wave for sensitive electronics
UPS mode during power outage
Support for charging from socket and solar panel
Display for parameter monitoring
Ability to connect an additional battery
Specifications:
Battery capacity: 1024 Wh
Continuous power: 2000 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, DC
9. Jackery Explorer 1000 v2
Jackery Explorer 1000 v2 is used as a backup for a gas boiler in an apartment, house, or cottage. The pure sine wave output ensures correct operation of electronics and the circulation pump. The UPS mode allows automatic switching to battery power during a power outage.
The body is compact, with an integrated carrying handle. The panel includes 230 V sockets and ports for additional equipment. The display shows input and output power as well as charge level. This format is suitable for a moderate backup scenario without connecting large household appliances.
Key features:
Pure sine wave for the boiler control board
UPS mode for protection against outages
Support for charging from the grid and solar panel
Display showing operating parameters
Compact body with handle
Specifications:
Battery capacity: 1070 Wh
Continuous power: 1500 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, car socket
10. EcoFlow RIVER 3 Max
EcoFlow RIVER 3 Max is used as a backup for a gas boiler in an apartment or small house. The power is sufficient for the pump and electronic control board. The pure sine wave output maintains stable voltage, and the UPS mode allows maintaining power during a sudden grid outage.
The body is compact and does not take up much space next to the boiler. The panel has 230 V sockets and ports for additional equipment. The display shows the charge level and current load. This option is suitable for a basic scenario where it is important to maintain heating without connecting energy-intensive appliances.
Key features:
Pure sine wave for stable boiler operation
UPS mode with automatic switching
Support for charging from the grid and solar panel
Ability to connect an additional battery
Compact body with handle
Specifications:
Battery capacity: 572 Wh
Continuous power: 600 W
Battery type: LiFePO4
Device connection: 3 AC 230V sockets, USB Type-A, USB Type-C, car socket, XT60
11. NewsMy X2400
NewsMy X2400 is used for backup power of a gas boiler in a house with higher load. The energy reserve is enough not only for heating but also for accompanying equipment. The pure sine wave ensures correct operation of automation and the pump. The UPS mode maintains power continuity during a grid outage.
The body is designed for stationary use, with a handle for movement. The panel has 230 V sockets and a set of ports for additional equipment. The display shows operating parameters and charge level. The format is suitable for a house requiring a stable reserve for several hours.
Key features:
Pure sine wave for sensitive electronics
UPS mode for protection of the heating system
Support for charging from the grid and solar panel
Ability to connect an additional battery
Display for load monitoring
Specifications:
Battery capacity: 2016 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connection: 4 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket, XT60
12. Anker 767 PowerHouse - 2048Wh 2400W
Anker 767 PowerHouse is used as a backup solution for a house where the gas boiler operates together with pumps and other equipment. The power is sufficient to start equipment with increased load. The pure sine wave supports stable electronics operation, and the UPS mode allows maintaining power without interruption.
The body is larger, with wheels and a handle for movement. The panel has 230 V sockets and several ports for parallel device connection. The display shows battery status and current load. Suitable for a house requiring a power reserve and long autonomous operation.
Key features:
Pure sine wave for heating equipment
UPS mode during power outage
Support for charging from the grid and solar panel
Wheels and handle for movement
Display showing parameters
Specifications:
Battery capacity: 2048 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connection: 3 AC 230V sockets, USB Type-A, USB Type-C, car sockets
13. EcoFlow RIVER 2 Pro
EcoFlow RIVER 2 Pro is most often used as a backup for a gas boiler in an apartment or medium-sized house where it is important to maintain stable heating during a power outage. The power is sufficient for the pump and electronic control board. The pure sine wave maintains correct voltage, and the UPS function allows automatic switching to battery power without restarting equipment.
The body is compact, with a convenient carrying handle. The panel includes 230 V sockets and additional ports for accompanying equipment. The display shows the charge level and current load. Suitable for a scenario requiring reasonable autonomy without transitioning to large stationary systems.
Key features:
Pure sine wave for correct boiler operation
UPS mode with automatic switching
Support for charging from the grid, car, and solar panel
Display for parameter monitoring
Compact body with handle
Specifications:
Battery capacity: 768 Wh
Continuous power: 800 W
Battery type: LiFePO4
Device connection: 3 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket
14. BLUETTI AC200PL 2400W
BLUETTI AC200PL is used as a more powerful backup for a house where additional equipment operates together with the gas boiler. The energy reserve is sufficient for the heating system and accompanying load. The pure sine wave ensures stable operation of sensitive electronics, and the UPS function reduces the risk of boiler shutdown during grid interruptions.
The body is designed for stationary placement, with a handle for movement. The panel has four 230 V sockets and additional ports. The display shows operating parameters and charge level. This format is chosen when longer autonomy is required.
Key features:
Pure sine wave for heating equipment
UPS mode for protection against outages
Support for charging from the grid and solar panel
Display for load monitoring
Presence of wireless charging
Specifications:
Battery capacity: 2304 Wh
Continuous power: 2400 W
Battery type: LiFePO4
Device connection: 4 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket, wireless charging
15. Anker SOLIX C1000 1056Wh
Anker SOLIX C1000 is considered a balanced solution for backup power of a gas boiler in an apartment or private house. The nominal power is sufficient for stable operation of automation and the circulation pump. The pure sine wave maintains correct voltage, and the UPS function allows the station to take over the load during a power outage.
The body is compact for its class, with a carrying handle. The panel has 230 V sockets and ports for additional equipment. The display shows the charge level and current load. Suitable for a moderate backup power scenario without connecting energy-intensive equipment.
Key features:
Pure sine wave for the boiler control board
UPS mode during power outage
Support for charging from the grid and solar panel
Ability to connect an additional battery
Display showing parameters
Specifications:
Battery capacity: 1056 Wh
Continuous power: 1800 W
Battery type: LiFePO4
Device connection: 4 AC 230V sockets, USB Type-A, USB Type-C, car socket, XT60
16. BLUETTI Premium 200 V2
BLUETTI Premium 200 V2 is used as a backup power supply for a gas boiler in a private house where long autonomy is required. The 2073 Wh capacity is sufficient for automation and circulation pump operation for an extended period. The continuous power allows connecting not only the boiler but also additional equipment.
The station operates on a LiFePO4 battery with a resource of up to 6000 cycles, suitable for regular use. Charging is possible from the grid, car socket, or solar panels. The display shows current load and charge level. This format is chosen for a house where it is important to maintain heating without pauses in operation.
Key features:
Pure sine wave for stable boiler operation
UPS mode with fast switching
Support for charging from the grid, car, and solar panel
LiFePO4 battery with increased cycle life
Display for load and charge monitoring
Specifications:
Battery capacity: 2073 Wh
Continuous power: 2600 W
Battery type: LiFePO4
Device connection: 2 AC 230V sockets, USB Type-A, USB Type-C, DC, car socket, XT60
How to choose a charging station for a gas boiler
A gas boiler does not consume a lot of electricity, but it is sensitive to power quality. It is important not just to take a station "with a reserve", but to choose a model that will stably support the operation of automation and the pump at the moment of power outage. When choosing, several practical points should be considered:
Output signal type: Pure sine wave is mandatory. The boiler electronics and circulation pump operate correctly only with stable voltage without distortions.
Nominal power: For most household boilers, 300-800 W is sufficient. It is better to have a small reserve so that the station does not operate at its limit.
Battery capacity: This determines the autonomous operation time. For 3-5 hours, 500-1000 Wh is suitable; for longer autonomy, look at models from 1000 Wh and above.
UPS function: Allows the station to automatically switch to battery during a grid outage. The boiler does not restart and continues working without pauses.
Battery type: LiFePO4 lasts longer and withstands more charge cycles. This is important if outages occur regularly.
Charging methods: It is convenient when the station can be charged from the grid, car, or solar panel. This provides flexibility in different conditions.
Noise level and cooling: In an apartment, it is important that the fans do not run constantly and do not create extra noise near living spaces.
In the end, focus not on the maximum numbers in the specifications, but on the real task - ensuring stable boiler operation at the right time. A properly selected station simply stays connected and does not require constant attention.
Conclusion
A charging station for a gas boiler is not about power "with a reserve for all cases", but about stability and predictability. The boiler needs clean power, fast transition to backup, and sufficient capacity to calmly survive an outage. If these parameters are met, the heating system will continue to work as if nothing happened.
When choosing, they usually focus on the boiler's actual consumption and the desired autonomy time. There is no point in overpaying for kilowatts that will not be used. Much more important are pure sine wave, reliable battery, and UPS function. Then the station becomes just part of the home infrastructure - connected, ready, and requiring no extra attention.